IEC Male C14 to Down Right Angled 90 Degree IEC Female C13 Power Extension Adapter AC Converter

IEC Male C14 to Right Angled 90 Degree IEC Female C13 Power Extension Adapter

An angled power connector. The plug type for this adapter is IEC 320 C14 to C13, featuring a 90-Degree Angle AC Converter design with an IEC 3-Pole Male to Female 90-Degree Angle Configuration.

You'll want to check your device to see which way the cable would exit when plugged in.

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

 It supports a maximum current of 10A and is compatible with a voltage of 250V, ensuring efficient power transfer for various electronic devices.

Offering versatile compatibility, it is suitable for a wide range of electronic equipment that requires an IEC 320 C14 to C13 connection, making it a flexible solution for various setups.

C13 Power Connector is a computer Connector used to power a PC or monitor. It’s the typical PC power Connector you’ll find attached to the back of your computer or monitor. You can also find these Connectors at the end of most desktop power supplies. They have three, as opposed to two, prongs (or pins) on either end of the Connector and are often called kettle Connectors, “figure 8” Connectors, or IEC C13 power Connectors.

The C14 power Connector is an international standard for the connector end of a power Connector. The connector has three round prongs with a larger ground pin than the other two. The pin arrangement of a C14 plug is identical to that of a C13 power Connector. Therefore, the C14 plug will fit into a C13 socket and vice versa, but they are not interchangeable on every device.

The C13 connector is rated for up to 10 amps at 250 volts and is designed for use with appliances that run on either 120 or 240 volts. In contrast, the C14 connector is intended for use with devices that run on 230 volts. This means that the C14 connector is rated for up to 15 amps at 250 volts.