Internal 36 Pin Mini SAS SFF-8087 Host to 4 SFF-8482 Target SAS Hard Disk and SATA Power Cable

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive.

enables you to connect e.g. a controller with mini SAS 36pin connector (SFF 8087) to 4 SAS (SFF 8482) HDD.

Hard Disk Fanout Raid cable

Host: SFF-8087 connector

Target: SFF-8482 SAS connector

With SATA 15pin power connector

100cm

Internal 36 Pin Mini SAS SFF-8087 Host to 4 SFF-8482 Target SAS Hard Disk and IDE Power Cable

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 4pins/15pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive.

enables you to connect e.g. a controller with mini SAS 36pin connector (SFF 8087) to 4 SAS (SFF 8482) HDD.

Hard Disk Fanout Raid cable

Host: SFF-8087 connector

Target: 4xSFF-8482 SAS connector

With 4pin/15pin power connector

Length:100cm

Internal Mini SAS SFF-8087 Male to External SFF-8088 Female Extension Cable PCBA With Low Profile Bracket

SFF-8087 36pin Internal four channel connector (data only),SFF-8087 connectors tend to have locking mechanisms that snap into place when a cable is inserted. This generally keep the connections secure over time even if there is minor chassis movement and vibration.

SFF-8088 26pin External four channel connector (data only), A SFF-8088 cable is capable of carrying four data lanes (equivelant to an external version of the SFF-8087). One important feature here is the fact that the SFF-8088 cables “lock” into place which is important as an external connection method.

Supports up to 12Gb/s Mini SAS Data Transfer Rate, Length 50cm

External 8088 female to internal 8087 male cable, will work both on the host and device side. With Low Profile bracket.

The High Density (HD) system referenced as Mini-SAS (SFF-8088) in the SAS 2.1 standard, meets the 12Gb/s SAS specification.

These Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

SFF-8088 Mini SAS cable for reliable data transfer in server and storage environments.

Versatile Compatibility: Suitable for SAS RAID controllers, backplanes, and other SAS-equipped hardware.

External Mini SAS SFF-8088 Male to SFF-8088 Female Extension Cable PCBA With Low Profile Bracket

Supports up to 12Gb/s Mini SAS Data Transfer Rate, Length 50cm

SFF-8088 26pin External four channel connector (data only), A SFF-8088 cable is capable of carrying four data lanes (equivelant to an external version of the SFF-8087). One important feature here is the fact that the SFF-8088 cables “lock” into place which is important as an external connection method.

External 8088 male to female cable, will work both on the host and device side. With Low Profile bracket.

The High Density (HD) system referenced as Mini-SAS (SFF-8088) in the SAS 2.1 standard, meets the 12Gb/s SAS specification.

These Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

SFF-8088 Mini SAS cable for reliable data transfer in server and storage environments.

Versatile Compatibility: Suitable for SAS RAID controllers, backplanes, and other SAS-equipped hardware.

FlexStack Stacking Cable CAB-STK-E-0.5M Compatible for 2960S 2960X 2960XR Networking Switch

With a 0.5 m length. It can be installed in 2960S, 2960X and 2960XR series switches.

Compatible for Catalyst 2960-24LC-S, 2960-24LT-L, 2960-24PC-L, 2960-24PC-S, 2960-24-S, 2960-24TC, 2960-24TC-L, 2960-24TC-S, 2960-24TT, 2960-48PST-L, 2960-48PST-S, 2960-48T, 2960-48TC, 2960-48TC-L, 2960-48TC-S, 2960-48TT, 2960-48TT-L, 2960-48TT-S, 2960-8TC, 2960-8TC-S, 2960G-24TC, 2960G-48TC, 2960G-8TC, 2960PD-8TT-L, 2960S-24PD-L, 2960S-24PS-L, 2960S-24TD-L, 2960S-24TS-L, 2960S-24TS-S, 2960S-48FPD-L, 2960S-48FPS-L, 2960S-48LPD-L, 2960S-48LPS-L, 2960S-48TD-L, 2960S-48TS-L, 2960S-48TS-S,.

Compatible for Blade Switch 3120G , Blade Switch 3120X , Blade Switch 3130G M1000e with IP Base, Blade Switch 3130X M1000e with IP Base.

Compatible for Switch Module 3110G BladeCenter, Switch Module 3110X BladeCenter.

Stacking technology allows for a single configuration of up to 8 stacked switches.

Speeds up to 20 Gbps on Catalyst 2960-S and 2960-SF using C2960S-STACK or 2960S-F-STACK.

FlexStack Module Speeds up to 40 Gbps on Catalyst 2960-X and 2960-XR using C2960X-STACK FlexStack Plus or C2960X-HYBRID-STK FlexStack extended hybrid module.

All units are quality tested on 2960-X series switches.

SFF-8482 SAS Cable 29 Pin To 1 SATA 70CM

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive.

Note:

1. It can connect the SATA hard disk to SATA motherboard.

2. It can connect the SAS hard disk to SAS motherboard.

3. It can't connect the SAS hard disk to normal SATA motherboard. (it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.)

4. It can't connect the SATA hard disk to normal SAS motherboard. (it will be worked if your hard disk has the SAS chipsit, Otherwise can't work.)

Single SATA TO 1 SAS 29 pin straight SFF-8482 ,red color jacket

Cable Length : About 70cm;

Good Quality, New in Bag

UL2725 26AWG SATA CABLE JACKET RoHS

PCI-Express 4.0 Mini SAS SFF-8087 to SAS HD SFF-8643 PCBA Female Adapter With Bracket

The Adapter with Full and Low Profile PCI Slot Profile Mounting Bracket

The Adapter External will work both on the host and device side. it is reversible design.

The adapter support SAS to SAS or PCI-E to PCI-E singal.

Supports up to 12Gb/s Mini SAS or PCI-E 4.0 Data Transfer Rate.

External Mini SAS 26Pin 4x SFF-8088 to SFF 8088 4 Lane Data Disk Raid Multilane Cable 6Gbps

Length: 100cm

The SFF-8088 is a 26-pin ‘Mini SAS‘ connector, and utilizes a metal outer shell compatible with shielded external connections. Typical application would be a SAS link between a SAS HBA to a SAS drive subsystem.

External SAS Cable features "mini-SAS" SFF-8088 to SFF-8088 with heavy- duty metal backshells.

This 4-channel cable is constructed with a high-performance Madison cable, which features individually shielded parallel pairs,

double EMI/RFI shielding, EMI Noise Suppressor, and 10 Gigabytes per second performance on each channel.

MINI SAS 26P TO 26P,support 6gbps Band

Internal Mini SAS SFF-8087Host to 4 SATA 7pin Target Hard Disk 6Gbps Data Server Raid Cable

Mini-SAS cable configurations,The SAS system referenced as Mini-SAS (SFF-8087) in the SAS 2.1 standard, meets the 6Gb/s SAS specification.

Internal Mini-SAS Copper Cables,Internal Mini SAS SFF-8087 to to 4 SATA 7pin hard disk data Cable

This SAS cable enables you to connect up to 4 SATA drives to a Mini SAS SFF-8087 controller.


Connector:

Host: 1 x Mini SAS SFF-8087

Device: 4 x SATA 7 pin

Dual Ports Mini SAS HD SFF-8644 To Internal Mini SAS SFF-8087 PCBA Female Adapter With Low Profile Bracket

2-Ports SFF-8087 to SFF-8644 Adapter with Full PCIe Slot Profile Mounting Bracket;

External 8644 to internal 8087 adapter, will work both on the host and device side.

Supports External SFF-8644 Host Connectors.

Supports Internal SFF-8087 Device Connectors

Supports up to 12Gb/s Mini SAS HD Data Transfer Rate

With Lowe Profile and Standard Profile bracket.

The High Density (HD) system referenced as HD Mini-SAS (SFF-8644) in the SAS 2.1 standard, meets the 12Gb/s SAS specification.

These new HD Connectors will be used on the SAS 3.0 specification when it is released.

Dual Ports Mini SAS SFF-8088 To Internal SAS HD SFF-8643 PCBA Female Adapter With Low Profile Bracket

2-Ports SFF-8643 to SFF-8088 Adapter with Full PCI Slot Profile Mounting Bracket;

External 8088 to internal 8643 adapter, will work both on the host and device side.

Supports External SFF-8088 Device Connectors.

Supports Internal SFF-8643 Host Connectors

Supports up to 12Gb/s Mini SAS Data Transfer Rate

With Lowe Profile and Standard Profile bracket.

The High Density (HD) system referenced as Mini-SAS (SFF-8088) in the SAS 2.1 standard, meets the 12Gb/s SAS specification.

These Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

Internal SAS 4 SATA Host to 4 SATA 7pin Target Hard Disk 6Gbps Data Server Raid Cable 50cm

SATA cable configurations,meets the 6Gb/s SAS specification.

This SATA cable enables you to connect up to 4 SATA drives to a 4 SATA controller.

Connector:

Host: 4 x SATA 7 pin

Device: 4 x SATA 7 pin

Ultra Slim Flat Left Angled 90 Degree Mini SAS 36pin SFF-8087 to 8087 Data Raid Cable

Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA.

This allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements.

Positive and passive latching ensures that the plug remains mated to receptacle

All internal mini SAS assemblies are capable of supporting SAS/SATA generation I and II bandwidths

For Controller to Backplane applications

Ultra Slim Flat Left Angled 90 Degree Connector

Length: 80cm

Dual Ports Mini SAS SFF-8088 To SAS 36Pin SFF-8087 PCBA Female Adapter With PCI Bracket

2-Ports SFF-8087 to SFF-8088 Adapter with Full PCI Slot Profile Mounting Bracket; External 8088 to internal 8087 adapter, will work both on the host and device side.

Supports External SFF-8088 26-pin Host Connectors. Supports Internal SFF-8087 36-pin Device Connectors

Supports up to 6Gb/s Mini SAS Data Transfer Rate

Supports SFF-8087 to SATA Device Octopus Cables, SFF-8087 to SAS Device Octopus Cables, SFF-8087 to SFF-8087 Mini SAS Device Cables

With Lowe Profile and Standard Profile bracket.